Bear tracker loosing power on hill
#11
#12
Very possible as this area needs a very tite seal. Also the airbox needs a good sea also, many try to go with an after market filter and open up the airbox for more air flow but the carb is jetted lean from the factory so any additional air flow will cause a loss of power!
#13
#15
I haven't checked the valve lash, but the intake boot is all good. I had to replace the CDI because a few weeks ago the ATV wouldn't start. After process of elimination, it was the CDI box had gone bad. I didn't seem to have this bogging down issue previously. On a ride yesterday, it would not climb a steep hill. It would make it halfway up and then bog down - the engine remained reved up, but wheels wouldn't spin. I was in 1st gear and even with a running start, it wouldn't make it up the hill.
#16
#18
#19
#20
Hi, did you solve the problem? I have exactly the same problem, my bear tracker loses power and can't go up hill