i want to run new reeds, air filter, and pipe. what have you done to yours. thanks in advance for all your help.

 

does anyone own a blaster? come on i know your out there.

 

When I had mine, I put a pipe on it and went up 1 tooth on the front sprocket. It was a fun little machine.

 

i hate it when people post a topic then a few hours later on the same day they reply to their post to try to get more people to post. god shut up and have some patience. to make it worse you go and whine about it in a seperate topic. it pisses me off so much. god. just have some freakin patience.

 

wow juggalo that helped me so much, if i didn't reply back to it myself it would have slipped away and ********* like you could keep lying to each other about things you know nothing about.

 

My son and I are tearing apart his Blaster on the 4th. We will be putting in a power piston, K&N with outerwear, rejet the carb, and are undecided about the reeds, spacer block and pipe / silencer... Anyone with suggestions for reeds, pipe/silencer?

 

QUADNUT : try aktive carbon matrix reeds, a reed spacer, and a hetrick racing pipe/silencer. I only have the reed spacer right now and it adds alot of bottom end torque. The reeds and pipe add alot of hp over then entire powerband. Good Luck


01BLASTERJW : Juggalo is right. Have some patience, at least wait a week or so before you reply to your own post. Try the search feature for this forum. There have been hundreds of topics just like yours. You can find the info you need without bothering us "*********".

 

ha. if you go and read some of my other posts you would see that i am not a dick head but when something makes me mad i tell them about it. and what you did made me mad. it wouldn't have slipped away. you only waited 4 hours! it almost always takes longer than that. plus u have to look at the time of year it is. its summer plus when you posted it was one day before the 4th. so many people are out riding and out of town right now. so just have some patience. i could understand replying to your own message after 2 or 3 days of nothing but 4 hours is rediculous!

 

Patience is always good...and 4hr elay is really to short fo such a vague question...
reeds? VForce2 all the way!
Air filter? Dump the sock, get an adapter with a foam(UNI) or a K&N...which one doesn't really matter...just personal preference.
Pipes? The brand new Toomey (yes, for a blaster) are likely to be the best (newest).

The best performance increase (<u>IF the blaster airbox is similar to the banshee</u>) is probably removing th airbox lid (or putting a bigger snorkel). Don't forget to rejet!

Depending on how old your Blaster is, the best thing COULD be a rebuild...

Good advice...get a more explicit title...[img]i/expressions/face-icon-small-smile.gif[/img]

 

My blaster is fun to ride with my mods. It is not anything special like with a paul turner pipe or powerpros. But it will not drill a hole through your pocket. [img]i/expressions/face-icon-small-shocked.gif[/img]

Bills Pipe
Bills Scilencer
Boyseen Power reeds
Wiseco Pro lite Piston
Answer carbon Steel Handlebars
MSR Bar Pad (sx style)
Motion Pro Twist Throtle
18in. Holshot MX Rear tiers
21in. Holshot MX Front Tiers
MSR Scilencer Packing
Universal teather Kill Switch
DG Alloy Bumper

Now, I already know some one is gonna Dis on the bills. BUT, unless you have riddin one with bills dont say a thing.
Uni-Air filter