Just a question about the Kit I installed everything and it runs pretty good I just forgot to screw in the air fuel screw and then back it out 3 turns. Wondering what it normally is from the factory and should I bother to take it back apart and screw it in then back out 3 turns?

Nocando

 

Mine were 2.5 turns out (stock). But you can reset yours without removing the carbs. The screw is external to the carbs and faces down. With a mirror and stubby screwdriver, you should be able to make this adjustment.

good luck.

 

I knew it was external but I thought it would be har to get right while the carbs were still in place Thx for the info...I wonder if that extra half turn would make any diff.


Nocando