2000 Yamaha Banshee
#1
#2
As with any two stroke, the Banshee should be "cleaned out" when riding. This required occasional full throttle/high rpm. There isn't much power at low rpm, so I doubt you'd be spending much time there. "Bogging" it like a four stroke is pretty much a waste. There's no reason to ride the Banshee like that all the time. If that's what you want to do, then you're buying the wrong quad. Get a 400EX instead. For regular trail riding, it's not going to be a problem. Just give it a blast or two down a straightaway and the plugs won't foul.
I've had the same plugs in my Banshee for a year now and it still runs fine. Anyone who says that two strokes foul plugs all the time, must not have had their motor jetted properly, or they had another mechanical problem. Either that or they don't know what they are talking about.
I've had the same plugs in my Banshee for a year now and it still runs fine. Anyone who says that two strokes foul plugs all the time, must not have had their motor jetted properly, or they had another mechanical problem. Either that or they don't know what they are talking about.
#3
I have a 2-stroke Polaris and it fouls plugs at regular intervals, probably once a month or so. I am pretty sure it is a jetting problem (too rich), but haven't taken the time to fix it for two reasons: plugs are cheap and they are easy to take off and put back on. On a Banshee, the cylinder heads seem easily accessible, so you shouldn't have a problem changing them if the foul.
#4
Depends on where and mostly on how you ride. If you are going to make tight turns in the woods, just make sure your RPM is up high enough coming out of the corner. If you slide it through the corner the RPM will stay high as a result of the wheel spin. When the bike straightens out and the wheels bite in, the nose will be in the air and you'll be grabbing the next gear. Doesn't sound like there is any low-end-bog-down problems here!
If you are seriously worried about it, get a 400EX and chug around on that thing.
The other posters are right... fouling is usually the result of an improperly tuned machine. Assuming a rider on a properly tuned machine has big enough Kahunahs to stay in the gas!!
If you are seriously worried about it, get a 400EX and chug around on that thing.
The other posters are right... fouling is usually the result of an improperly tuned machine. Assuming a rider on a properly tuned machine has big enough Kahunahs to stay in the gas!!
#5
#6
#7
Trending Topics
#8
I don't know who/where these Banshee plug fouling problems come from??
When my girlfriend drove the Banshee for the first time, she chugged it around for at least 15 minutes. She didn't just chug it, she killed it in second and third gear a few times from running the rpms down so far. I got back on it and never had any troubles at all. I doubt you would be running your RPMS so low through a corner on your track that you would actually kill the motor!! Needless to say, I doubt you would ride it like that for a full 15 minutes!
Doesn't sound like fouling the plugs is your problem... I do wonder how often you could get the Banshee into sixth gear, riding in the terrain you described. This machine loves to go wide-open. It is one fun ride :-)
When my girlfriend drove the Banshee for the first time, she chugged it around for at least 15 minutes. She didn't just chug it, she killed it in second and third gear a few times from running the rpms down so far. I got back on it and never had any troubles at all. I doubt you would be running your RPMS so low through a corner on your track that you would actually kill the motor!! Needless to say, I doubt you would ride it like that for a full 15 minutes!
Doesn't sound like fouling the plugs is your problem... I do wonder how often you could get the Banshee into sixth gear, riding in the terrain you described. This machine loves to go wide-open. It is one fun ride :-)
#9
#10
I have had my 99 since the fall of 98 and have the original plugs in it from when I bought it. I sometimes ride slow through the woods for hours and have no problems. The only thing I would worry about is it getting warm if you aren't periodically moving fast enough to keep the water temp down. If it is jetted correctly I think plugs should last you just as long.