anybody deal with Powroll? considering their 430 Warrior kit for my friend anygood????

 

Call Poweroll directly and talk to Pam Falcioni--she'll give you the skinny on the different upgrades for the Warrior.

 

My good Buddy Dave Heap is running a Powroll 400 stroker, he's really rapped with the performance and Powroll service etc etc, let me know if you want dave's e-mail address.

 

Could somebody post Poweroll's phone # or web address. I need some more power! Thanks

[This message has been edited by NWwarrior (edited 01-20-2000).]

 

Their number is 541-923-1290, or powroll@aol.com

 

Thank You!

 

Yup the 400cc stroker and .080 bore is sweet from poweroll. The .430 lift cam really pulls well in all rpm ranges too.

Da Heapster
Wicked Warrior

 

I should also mention the DOCUMENTED gains I got from the flow-bench data from Powroll. 10-30% more flow after porting and polishing. The stroker crank offset is 5.6mm more than stock, and the torque is great off the line and up into the high RPMs it really revs out. I'm able to run 22" new XCT holeshots AND a bigger 15 tooth front sproket (40 rear) and not lug the low end.

Talk with Pam at Powroll in Oregon, she'll take care of you.

Da Heapster
1993 400cc Wicked Warrior
1994 Bitchin Banshee
1992 4x4 Big Bear
and a 300 h.p V10 dodge "quad" cab.


------------------

 

Gotta ask, how's that Warrior keep up with yer Banshee? Get to tackle any 400EX's yet?

 

does the modified warrior 400 or 430 from powroll compete with a 400ex as far as power