if i were to flip the front wheels on my warrior what would it do ?
and how would i go about doing that?

 

If you flipped then it would make your front end wider and more stable.
On my warrior I had to drill new holes on the other side of the rim because the valve stem hit my brake caliper. So I put a new valve stem on it and put one in backwards where the old one is.

 

You can't flip the front wheels because the valve stems will hit the brake calipers. You can take your old valve stems out then put valve stems in backwards in your origional holes. Then drill a hole in the other side of your rim and put a new valve stem in. I wouldn't do this though because your rims would look ugly and you can't return it to stock later. Just get wheel spacers.

 

Dont drill holes.
Get flush mount valve stems

flush mount valve stems

Just install these and reverse.