ive installed a set of keihin 34pj on my banshee i got cable for stock thumb throttle.problem is the slides do not go completly into the towers when throttle is wide open.i can adjust them to clear the towers but when doing so it causes the slides not to drop down all the way for idle .any one no whats wrong and how to fix?thanks

 

I ran into this problem when I put a 38TMX on my polaris. I took the throttle cap off and used a dremel tool on the places where the throttle arm hit the case at idle and WOT. Come to think about it, I also did the same when I installed the PE38 on the 250x. This give the arm a longer area for travel.