Dumbest thing every done to your quad
#11
#12
#14
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
My first quad was a 97 bayou, me and about six other people were standing around when on of the guys told me I couldn't knock over a tree about 2.5" in diameter, well i could do anything, so after not being able to knock it over in first, I got a run off in about third and hit the tree, in broke off at the base, but then it leaned against the tree behind it, making a very steep ram and sending my bayou up the tree. There was no damage to me or my bike. plus I got the tree.
99 wolverine (tree free)
fmf pipe,k&n power kit,25"bearclaws,yamaha shock covers. bored .020" white bros piston
99 wolverine (tree free)
fmf pipe,k&n power kit,25"bearclaws,yamaha shock covers. bored .020" white bros piston
#15
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Here's another: I was shipping my Scrambler down to the states in an 18 wheeler so I made a ramp to go from the back of my trailor up to the box of the truck. I decided to go nice and slowly... big mistake! Those suckers are higher than I thought and unfortunately I made my ramp out of some 1/2 inch chipboard sheets. Lets just say that 2 layers wasn't enough and with the front wheels in the truck the ramp snapped! If I were to have fallen back I would have most likely knocked myself out on my trailors rear end or worse. Dangling 4 feet in the air I leaned on the hood and hit the 4x4 button and barly made it. The worse part is that I had the truck do the pickup at my local mall in front of a restaurant where about 20 people were looking and laughing at me...
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)