Okay im finally going to buy a 2003 Banshee when they come out and i just wanted to ask you guys will the trinity racing Banshee 410cc power valve kitbe worth the money cause it says it produces 80hp cause i love to haul *** and I wanted to know if any of you guys or gals have it and if you think its sweet also if you had any problems installing it or you sent it to trinity to get installed but the thanks for the help(oh by the way i just joined and these forums are badass)

 

Why are you waiting to buy a 2003... They come out around the end of July at the earliest I think.

Besides, if you wait that long why not buy a 2002 and save yourself some cash. They are all the same.

 

no i was the dealer friday and he said the 03s will be out in a week

 

I run a T-Rex powervalve top end on my Banshee (Yes the FMF top end is a T-Rex top end made by Team Racers edge) and i can tell you that the picture of the PV top end on Trinitys site looks exactly like mine from the Rotax powervalve assembly,the YZ 250 reed valves to the pistons wich are Wiseco pistons by the way.It says on the Trinity site that they resleeved it to obtain a 410cc bore instead of the standard 400cc bore.

Now if you want to get around 80 rwhp out of this set up on pump gas that is you will at least need;CPI inframe drag pipes or real out of frame drag pipes,34+ mm carbs,10cc domes (160-170 psi compression at sea level)and most importantly a very serious drag racing type or very close to it port job.

 

Leave it at stock bore!! Get a good portjob and new carbs and a set of good pipes and reeds and all the little stuff and you will destroy the 410 with half the price. Find a good builder like allpro cycles, grand river racing (?) or I here some Rudy Kurtz is awesome also. A well built 350 with a good port will destroy a 370, 410, 420 etc.

 

Thanks guys im going to get an 2003 banshee cause my dealer also said they'll be out next week and 1 more question how much do you think ill get for a 2002 warrior with a K&N power kit and it only has about 40 hours on it with a few expected scratches

 

You could probally kit around 3500-3800 for it. Will be hard to sell though

 

Find a good builder like allpro cycles, grand river racing (?) or I here some Rudy Kurtz is awesome also.

LMFAO. All Pro is a good builder? Bahahahahahaha. [img]i/expressions/face-icon-small-happy.gif[/img][img]i/expressions/face-icon-small-happy.gif[/img][img]i/expressions/face-icon-small-happy.gif[/img][img]i/expressions/face-icon-small-happy.gif[/img][img]i/expressions/face-icon-small-happy.gif[/img]. Sorry, I cant quit laughing.

Why dont you just send them to MacDizzle?

 

This is good news. There is another thread that had a rumor that Yamaha wasn't going to build the banshee next year. I am planning on buying one late this year or early next year. How much do you think the 2002 model will sell for once the 2003 comes out?