raptor stearing knuckle
#1
Went riding yesterday and jumped kind of off camber and came down really hard on the right front and bruised my chest on the bars. Now my right wheel is turned out about an inch.. I checked everything and couldnt find anything bent - not tierods, tierod ends, or a arms..
After looking it over about a dozen times I found that the bottom piece thats bolted on the bottom of the steering stem that the inner tierods mounts to is bent. It looks like its iron though, not sure how this bent instead of the tierod end. I looked at my riding buddies and his seemed bent also - only his was bent less.
Anybody else bent this thing? Look from the front through the bumper down at the base of the stearing stem and check yours, on mine the tierod end on the left is 1/4" lower than the one on the right (when looking from the front)
After looking it over about a dozen times I found that the bottom piece thats bolted on the bottom of the steering stem that the inner tierods mounts to is bent. It looks like its iron though, not sure how this bent instead of the tierod end. I looked at my riding buddies and his seemed bent also - only his was bent less.
Anybody else bent this thing? Look from the front through the bumper down at the base of the stearing stem and check yours, on mine the tierod end on the left is 1/4" lower than the one on the right (when looking from the front)
Thread
Thread Starter
Forum
Replies
Last Post
Alex Rodak
ATV Videos
2
09-13-2015 12:30 AM
Alex Rodak
Yamaha
0
09-12-2015 09:39 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)