Do you use your trailtech lights AND stocks lights ??? I was curious if it is possible to run the stockers of the low beam and the trailtechs off the high beam ?? Can you run both at once with the stock stator ??? TIA


Michael

 

Yes I have mine wired so low beam
is just the stock low beam and high
beam is the trailtechs and the stock
high beam so you get 170 watts of light
been running it like that for over a yr
works great

 

I've been running mine off a seperate switch because I didn't know if the stock light switch could handle the extra amps.
redrocker what voltage lights are your trail techs?
I run 2~50 watt trail techs & I think I'll go ahead & hook them to the stock light switch.
It'll make for a cleaner hook up & I won't burn my hand when I use my remote switch!!

 

I removed the light's in the stock location and replaced them with 75w Ricky Stator light's. This set up put's out an excellent amount of light and it plugs into your factory harness.

 

Moose
I'm running 2 50 watt lights also
the stock switch works great
hope that helps

 

I'm gona hook up mine that way then, I can get rid of a lot of excess wiring that way!!
Thanks!