I lengthened my swingarm...
#12
Contact info:
BULLET Fabrication & Racing Electronics
1915 W. Artesia, Gardena CA 90247
(310) 327-3777 Ask for Mike
If you don't need your swingarm sent back to you right away he will wait until he has a bunch to do all at once and he will cut everyone a deal. I am sure it would be less than $200 and less for volume.
swingarm pix
BULLET Fabrication & Racing Electronics
1915 W. Artesia, Gardena CA 90247
(310) 327-3777 Ask for Mike
If you don't need your swingarm sent back to you right away he will wait until he has a bunch to do all at once and he will cut everyone a deal. I am sure it would be less than $200 and less for volume.
swingarm pix
#13
#15
I loosend the break line at the resevoir and rotated the fitting and it fits fine. I went to sandtoyz unlimited to get a new chain and they had a HUGE roll of stainless break line and they are 1/2 the price of everything else I have seen. I will probably end up getting stainless front and back.
2 of my friends are sending their swingarms to me to bring over to BULLET. One is getting a +2 and the other is going +4. Call Mike so the volume goes up and the price goes down!!
I am not sure how long he will be interested in doing the swingarms. I will take some spy photos of his dragsters and post. [img]i/expressions/face-icon-small-cool.gif[/img]
2 of my friends are sending their swingarms to me to bring over to BULLET. One is getting a +2 and the other is going +4. Call Mike so the volume goes up and the price goes down!!
I am not sure how long he will be interested in doing the swingarms. I will take some spy photos of his dragsters and post. [img]i/expressions/face-icon-small-cool.gif[/img]
#16
BlueLeader,
Awesome deal and the quality looks good too. Count me in for a +2 extension. There should be some kind a reward for great ideas like this from enthusiests like BlueLeader that pass on the savings and opportunities, don't you think?[img]i/expressions/face-icon-small-wink.gif[/img]
Awesome deal and the quality looks good too. Count me in for a +2 extension. There should be some kind a reward for great ideas like this from enthusiests like BlueLeader that pass on the savings and opportunities, don't you think?[img]i/expressions/face-icon-small-wink.gif[/img]
#17
Hy BlueLeader.............Did you get everything back together yet?? What do you think??[img]i/expressions/face-icon-small-happy.gif[/img][img]i/expressions/face-icon-small-mad.gif[/img][img]i/expressions/face-icon-small-sad.gif[/img][img]i/expressions/face-icon-small-shocked.gif[/img][img]i/expressions/face-icon-small-smile.gif[/img][img]i/expressions/face-icon-small-shocked.gif[/img][img]i/expressions/face-icon-small-sad.gif[/img][img]i/expressions/face-icon-small-mad.gif[/img][img]i/expressions/face-icon-small-happy.gif[/img]
#19
Round house bearing swingarms/carriers are stronger, have more chain adjustability in them, are height adjustable (due to the cam action of the carrier) and just look damn good.
3 Raptor Swingarms have **** themselves (cracked) at my track. I got mine welded and a 2" extension, but it just added to the forces involved and cracked again, so I now have a LSR BAJA +1 round house and have been trouble free. I just uncrated my 03 LE. hehe. A weeks work stripping the goodies off the 01 and prepping it for sale.
Tip, put 2 roller bearings on each side of the swingarm (front), the one that the swingarm bolt goes through) to spread the loadings, and toss that fibre sleeve thats in there. Andrew.
3 Raptor Swingarms have **** themselves (cracked) at my track. I got mine welded and a 2" extension, but it just added to the forces involved and cracked again, so I now have a LSR BAJA +1 round house and have been trouble free. I just uncrated my 03 LE. hehe. A weeks work stripping the goodies off the 01 and prepping it for sale.
Tip, put 2 roller bearings on each side of the swingarm (front), the one that the swingarm bolt goes through) to spread the loadings, and toss that fibre sleeve thats in there. Andrew.
#20