I lengthened my swingarm...
#1
#4
#5
I can't decide on weather to get a +1 or a +2. I do lots of hill shooting @ Glamis and Dumont so I figured a +2 but a few people said +2 takes away from turning and sliding ability in dunes and woods.
My Raps built a little and its a little tough to keep the front down, if you know what I mean)
Let me know what you guys think!
My Raps built a little and its a little tough to keep the front down, if you know what I mean)
Let me know what you guys think!
#7
I have the same type of extension on my stock swingarm. I went with the +2" and I love it! For $250 it was a BARGAIN! The Quad Shop did mine. Here is a pic:+2" swingarm extension
I highly recommend this modification to anyone with a Raptor! It has been one of my best investments (except for the 02 gear upgrade!)!
"TOID"
I highly recommend this modification to anyone with a Raptor! It has been one of my best investments (except for the 02 gear upgrade!)!
"TOID"
Trending Topics
#8
#9
#10
Ward, mine was just a little more than your$. I bought a 120 link chain because I did not know what to get either. It was the same cost as a shorter link chain. You will have to break it anyway.
The guy who did my swingarm makes custom dragster and funnycar frames and "other" stuff. Now that he has a jig and 8' of aluminum stock, I will ask him if he wants to do more. (I brought him 3 swingarms and 3 more friends want theirs done too). If he does, I will post his info here so people can contact him directly. I am guessing he will do Raptor swingarms for <u>less</u> than $200 each. I will find out.
A new Lonestar swingarm and bearing carrier is $735. (out of stock)
Avenger = $943
Sandragon = $735
White Knuckle = $750
I droped it off on my way in to work and picked it up on my way home. [img]i/expressions/face-icon-small-happy.gif[/img]
The guy who did my swingarm makes custom dragster and funnycar frames and "other" stuff. Now that he has a jig and 8' of aluminum stock, I will ask him if he wants to do more. (I brought him 3 swingarms and 3 more friends want theirs done too). If he does, I will post his info here so people can contact him directly. I am guessing he will do Raptor swingarms for <u>less</u> than $200 each. I will find out.
A new Lonestar swingarm and bearing carrier is $735. (out of stock)
Avenger = $943
Sandragon = $735
White Knuckle = $750
I droped it off on my way in to work and picked it up on my way home. [img]i/expressions/face-icon-small-happy.gif[/img]