03' Blaster vs. 02' Blaster w/ Toomey?
#1
Can a STOCK 03' Blaster beat a 02' Blaste w/ Toomey? I know this is a very dumb question but a non-friend of mine says he can smoke me with a freakin stock 03' Blaster! I guess he think's that they re-built the motor and made it a 250cc. He doesn't know very jack-S**T about quad's. I told him as soon as he get's it I'll drag race him. I'll even give him a 10ft. lead to start[img]i/expressions/face-icon-small-wink.gif[/img]. Thanx again for answering such a stupid question.[img]i/expressions/face-icon-small-smile.gif[/img]
#2
#4
Yeah the 02 with the toomey would be faster. The only difference between the 02's and 03's are the plastic and brakes. If he doesn't know anything about quads chances are he doesn't know how to drive it very well so you oughta smoke him anyways.[img]i/expressions/face-icon-small-wink.gif[/img]
#5
Yea, his last quad was a polaris 90![img]i/expressions/face-icon-small-smile.gif[/img][img]i/expressions/face-icon-small-smile.gif[/img][img]i/expressions/face-icon-small-smile.gif[/img][img]i/expressions/face-icon-small-smile.gif[/img][img]i/expressions/face-icon-small-smile.gif[/img] He's been talkin smack about mine at school all day!! I'm gettin sick of him. I'm pretty confident I'll smoke him. I hopefully won't wheelie off the holeshot! Speakin of that I need some tips on gettin of the holeshot good!
#6
start in 2nd, roll the clutch, don't dump it, if you dump it you could either spin the tires or wheelie. Meaning, hold the clutch in while holding in the brakes, let the clutch out just a little to where you feel the quad wanting to move but it doesn't, pin the throttle and let er' rip.
Good Luck and keep the shiney side up
Good Luck and keep the shiney side up
#7
your friend doesn't know what he's talkin about he'll have no chance. they made no changes to the motor just brakes and styling. And the toomey pipe makes it a whole new quad so you should win easily
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



