Hey Roostking............
#11
Man, you're harsh... You need some... Well you know.
I got lot's of stuff on my Shee now. T5s, coolhead and 19cc domes, +4 degree key, impeller, TORS removed, reeds, K&N, etc, etc.... I'm planning on doing some more this winter before January - either porting or those Vitos SS Pistons. I want to keep it RELIABLE but still fast enough to whoop up on the majority of the 4 stroke guys.
BTW, I need to work on that mods section on my site. I put up the temp gauge mode but that's all I ever got around to.... Takes work ya know.
Remember, my machine may only make 40 HP or so but thats 40 HP more than your is making. [img]i/expressions/face-icon-small-smile.gif[/img]
I got lot's of stuff on my Shee now. T5s, coolhead and 19cc domes, +4 degree key, impeller, TORS removed, reeds, K&N, etc, etc.... I'm planning on doing some more this winter before January - either porting or those Vitos SS Pistons. I want to keep it RELIABLE but still fast enough to whoop up on the majority of the 4 stroke guys.
BTW, I need to work on that mods section on my site. I put up the temp gauge mode but that's all I ever got around to.... Takes work ya know.
Remember, my machine may only make 40 HP or so but thats 40 HP more than your is making. [img]i/expressions/face-icon-small-smile.gif[/img]
#12
You need some... Well you know.
BTW, I need to work on that mods section on my site. I put up the temp gauge mode but that's all I ever got around to.... Takes work ya know
Remember, my machine may only make 40 HP or so but thats 40 HP more than your is making.
RoostkIng...
#13
oh Roostking...i bet u blew up ur shee racin a raptor... tryin to make urself look cool! then goes BOOM!haha raptor wins ur done for the weekend haha!!!... know look u build a big bad shee...to pick on more raptors.
and u know what...i have yet to meet a fast shee owner thats not full of himself and his ride....roost when u go to walden and kill most of everyone, don't let it go to ur head!!!
oh and my raptor may be done by the next time i ride w/ ya...could make for a close race????
peace....
and u know what...i have yet to meet a fast shee owner thats not full of himself and his ride....roost when u go to walden and kill most of everyone, don't let it go to ur head!!!
oh and my raptor may be done by the next time i ride w/ ya...could make for a close race????
peace....
#14
Disturbed, well for once you are right, I was racing a Raptor. Although I was quite a bit ahead when it happened, its true, I was racing Michael AZ...I will never here the end of it from him!
RoostkIng...
RoostkIng...
#15
So, when do you plan to have the Banshee rebuilt???
Just remember, the more extreme you go the less dune-able the quad will be and less reliable. I still think the ported 350 or 370 LR would be the best all around package.
Just remember, the more extreme you go the less dune-able the quad will be and less reliable. I still think the ported 350 or 370 LR would be the best all around package.
#16
Wyoduner,
Yea, I thought about the reliablity deal, the problem is, my crank got ate up. So it was only $500 (minus the big carbs and swingarm!)more to go with a stroker setup. In other owrds, a 370 would have probably been more expensive. I am currently looking for a second job so i can pay this motor off sooner, then I will be buying a second bike that will remain relatively stock for my duner. I actually rode a friends ATC 250R duning(the same weekend I blew up) so I will probably go that route or a 350X. they can be had around here for pretty cheap in awesome shape, have to see what happens. I have been asking around and this motor should still be duneable, but yea, it was a hard choice, but for $500, i just know that if i had decided not to do it, i would have regretted it. I do know one thing, my intake of adult beverages will be dramitically decreased when I get this bike!!!
RoostkIng...
Yea, I thought about the reliablity deal, the problem is, my crank got ate up. So it was only $500 (minus the big carbs and swingarm!)more to go with a stroker setup. In other owrds, a 370 would have probably been more expensive. I am currently looking for a second job so i can pay this motor off sooner, then I will be buying a second bike that will remain relatively stock for my duner. I actually rode a friends ATC 250R duning(the same weekend I blew up) so I will probably go that route or a 350X. they can be had around here for pretty cheap in awesome shape, have to see what happens. I have been asking around and this motor should still be duneable, but yea, it was a hard choice, but for $500, i just know that if i had decided not to do it, i would have regretted it. I do know one thing, my intake of adult beverages will be dramitically decreased when I get this bike!!!
RoostkIng...
#17
Yep, I get ya... Since you're in there anyway replacing all that stuff might as well spend a little more and go all the way.... All I can say, is that thing better be running when I drive down there to go to FSWs.
I plan on swinging by and heading out to Glamis with you and Michael.... That way I can take a break on the drive down, and you guys know your way around Glamis so I'll tag along.....
I plan on swinging by and heading out to Glamis with you and Michael.... That way I can take a break on the drive down, and you guys know your way around Glamis so I'll tag along.....
#19
Check it out here: 4 Stroke Wars Info
It should be a lot of fun... All the fastest 4 strokes competing with each other.... Of course 2 strokes can't play since that wouldn't be fair. [img]i/expressions/face-icon-small-smile.gif[/img]
It should be a lot of fun... All the fastest 4 strokes competing with each other.... Of course 2 strokes can't play since that wouldn't be fair. [img]i/expressions/face-icon-small-smile.gif[/img]


