hi all can any one tell me what is the best pipe for a banshee i want the best one that gives me the highest HP and torqe and i want the bottom power and the top end to be change for the best .

P.S : i dont like the look of the CPI so i dont want it . and im confuse in theas pipes . FMF , TRINITY , TOOMMY , PRO-SERCUTE , BILLS

 

im thinking of buting a boost bottle jetting air filter hinson complet sit reeds dyna igni. full pipe and in the future coolhead with dumes .

 

The most power is cpi, but you dont want that.

I think the next pipe would be the toomey t5. I hear that the trinity makes about the same power accross the board.

I think 4wt-online is making a pipe called the thunder pipe, but it closely resembles the cpi.

I dont think you can really increase power in the low end, and then increase the top end also. Banshees dont have much low end and that is an inherent problem. You can buy adjustable pipes from LRD and then you could adjust the pipe to come on at different rpm.

Hope it helps some
Bat

 

I have nothing but good about CPI's.[img]i/expressions/face-icon-small-smile.gif[/img]

 

Toomey T5's if you ride, CPI's if you drag

 

CPIs are not just drag pipes. There are plenty of non ported banshees that run CPI. Jeeze, Michael, I think youve seen my CPI's on my bike, and it aint no drag racer.

Whats not to like about the looks of the CPI" Theylook like real pipes compared to toomey and FMF's. By the way, FMF's give more Bottom end. You may want to look at some FMF SST. Toomeys zre more of a top end, while sacrificing low end.

RoostKing...

 

Everyone in this area has the CPI's on their Banshees. They seem to do a good job with riding around. Just from my observance. Bubba

 

For those who think that the CPIs (inframes) are drag only pipes...You are way wrong!!!
They wont perform much better than the T5s on a stock bike but once you start modding your Shee, they will kick the crap out of any other pipes outhere with maybe the exception of the FMF Fatties (if you are still on stock bore even then...) I find it funny how peeps keep talking the FMF pipes down, i am sorry but i have seen "some" of the fastest bikes outhere (350s) running on Fatties so....

 

pro circuit pipes with procircuit sound great and helped pump out alot of HP after tuning jets, and adding filters

ive heard nothing but good about DMC pipes

 

let me clarify my previous post, UNLESS you have porting,etc. done CPI"s are a waste of money because CPI's are a topend based pipe.IF you do have mods done CPI's are the best you can buy for the top end.