Anyone know where I can get the stuff to turn my Warrior into a stroker? Or even a Big Bore kit Biggest ive seen is 270cc's.

 

simple find a broken kodiak take the cylinder crank and warrior motor have the cases machined to fit the cylinder install the crank U may have to shave a little of the cases put a bigger sleeve in the kodiak cylinder put a grizzly piston in her and install a hotter cam and roost on actaully I don't know if any of that will work sounds possible though

 

From your post, sounds like you've been huffing some exhaust fumes.......270cc? You thinking of a blaster?

I've got a 400cc Warrior, bored .080" and stroked 5.6 mm on the crank. Powroll did the crank work, and I did all tear-down and assembly. Porting, .430 lift cam, oil-cooler, 10.25:1 piston.....I did it all to my Wicked Warrior with no regrets.

For full details check it out at:

http://homepages.ihug.co.nz/~crainic/Powroll_grunt.htm

Dave

 

check out team Alba the do a hell of a hop up for the warrior(dirtwheels DEC 99)up to 387cc THEY ARE CLAMING FROM 18 HP TO 30 HP + OR -