I just ripped all that e-brake crap off and put on a new clutch perch and assembled wires. my question is, I am still waiting on the block off plate. I wanna go riding this weekend and I'm not sure if it will be here by then. What can I do till my plate comes.
Thanks [img]i/expressions/face-icon-small-smile.gif[/img]

 

You can do what I have done untill my kit comes. Take a piece of coathanger wire and wire the brake piece to the handlebars. Works fine, I raced all winter with it like that. You can cover up the hanger wire with the rubber boot and no one will be the wiser.

 

i have the clutch perch and cable all hooked up, i have taken off the e-brake assembly now all im left with is the hole on the caliper. Duct tape right now. [img]i/expressions/face-icon-small-confused.gif[/img]

 

Will Duct tape be ok. [img]i/expressions/face-icon-small-confused.gif[/img][img]i/expressions/face-icon-small-sad.gif[/img][img]i/expressions/face-icon-small-confused.gif[/img][img]i/expressions/face-icon-small-frown.gif[/img]

 

Duct tape will do fine. As long as you keep dirt and dust out of the assembly. I used a piece of "can cooler" foam, cut it to right shape, then cut a piece of sheet metal to put over it. Bolt it down with stock bolts and it will compress the foam and keep dirt out until your Block Off arrives....[img]i/expressions/face-icon-small-wink.gif[/img]

 

u can just leave the old setup on the caliper just take the cable out of it....