well, you can either ship out the front fairing to have it modified using fiberglass, or you can try to find one off of a panterra 125cc bike, they have the exact same mounts but look AWESOME...actually they look AMAZING compared to the 200gy. you can check it out at www.pepboys.com its called a panterra 125. As far as the front fender goes, im guessing you don't like how it flares out at the front, so you can actually shave it to make it look like. Basically gind down the sides of it to make it the same width as the rest of it.

 

Those bikes and the Gys are nice. I wish I had some money so I could buy one.

 

I have a GY 200 in the box with minor shipping damage. I can give you a good deal on this bike if you were interested??
kids ATV's Raceway ATV.

 

That is very kind of you. My Uncle, his name is Sam owes me some money. I think if I ever get it. I will have to buy one and a toy box to put it in. I think it would be good to pay full retail, because you have to work for a living too.

I have a CZ 180 and its trash. This looks like a much nicer bike.

Dont sell yourself short.

If my uncle ever pays me back for all the money he stole. I will get one.

 

Do these bikes have Vin nubers on the frame and motor? Or is it just the frame?

 

they have vins on frame and motor

 

Chris, I just replaced the 56t sprocket on my gy w/a 46t and got about 8mph(66) on my top speed. I did not notice any difference in torque, I actually think it has more pickup on the street because you can run each gear up to a higher speed. I haven't had it off road w/ the new sprocket, but I didn't notice any difference on the street.

If you are still looking Andy Giza had them for $49 plus s/h you can contact him at
Pennisman22@aol.com. He had them on Ebay, I don't know if he still does, I hate buying stuff on the net so I emailed him and he sent me the address. His company is XRT racing. He was very prompt in letting me know he had recieved payment, and the day it was shipped. He is very professional and I would recommend him to anyone. He also has other aftermarket parts for the GY that are beyond my mechanical ability so email him and he can tell you about them.

Sean

 

I also have the 49 tooth sprocket on my 200 and it works great !! The top end speed is really @ 65 unless you are willing to run it further but vibrations and wheel wobble get intense, The best part is now you can cruise comfortably between 55 and 60 at only 1/4 throttle with acceleration to spare. I have taken mine off road and no noticable toreque loss at all. First gear is now actually usable.

All in all its a great mod and XRT's sprocket bolt on and matches perfectly !! I did have to remove 3 links. Highly recommend XRT for this and hes very helpful with any other 200 questions.

 

In my last post I wrote that I put on a 46t sprocket, it was actually a 49t. My mistake.
XRT Racing does have various size sprockets for the GY, and also smaller front sprockets.

Sean

 

I am just wondering why didn't you change the front sprocket instead of the rear ?I would think it would be alot cheaper and you would not have to cut the chain..