Need to help with a 110ccm engine!

Reply Subscribe

Thread Tools

Search this Thread

Jul 20, 2012 | 07:39 AM

splitdude

Thread Starter

Weekend Warrior

Joined: Jul 2012

Posts: 1

Likes: 0

Need to help with a 110ccm engine!

Hi there!

Can anyone tell me what this screw do?
This is an 110ccm China engine.

http://bildr.no/view/1232991

Best Regards,
Frank

Jul 20, 2012 | 10:17 AM

Jaster94

Extreme Pro Rider

Joined: Jun 2009

Posts: 3,224

Likes: 9

From: Texas

centrifugal clutch adjustment.

Clutch Adjustment
With the centrifugal clutch it will need to be adjusted as it wears. There is an external adjustment screw that will either put more or less tension on the clutch disk. By holding the stud with a screw driver and loosening the jamb nut. Slowly turn the stud counter clockwise until there is resistance felt. Then turn the stud 1/8 turn clockwise.
Tighten the locknut to 11ft.lb. torque.
NOTE:
Turning the adjusting stud clockwise will increase the free play (more slippage), and counter clockwise will decrease the clutch free play (less slippage). this is on a kazuma. i believe it'd work on all chinese quads that are set up like this one.