Evening gents,

I purchased a coolster atv for my son whos 5 years old last week thursday. Bike ran great until sunday in which now it stopped working.
Seems to be an electrical issue because when I turn the key to ON positions I get no current to the headlights nor tail lights. I don't have a multimeter at the moment to test for voltages.

Can someone give me a brief run down to what components or relays in which can be causing the issue?

Thanks,

Anthony.

 

go through the wiring harness and disconnect the quick connects. check each spade and then reconnect. i betcha you got one spade that has come apart. even check the red slider kill switch's quick connect and the keyed ignition. also, if equipped, is the inline fuse still good that's located near the battery?

 

Greatly appreciated! Im gonna go examine the connectors. I've noticed alot of components failing. Gas tank flew off (no thread on tank), tail light cover unscrewed itself due to vibrations,battery had calicum build up around terminals and now electrical issue.

Note, this was a floor model "pre assembled". I didn't have time to wait for a 95 dollar assembly fee for one out the box. I reckoned going back to work early, should have waited for a new bike.

 

Still no power. Any thoughts?

 

let's trace through the circuits. battery to/from key and solenoid. got a test light at the least? that'll help.

 

Let's check the battery for voltage then go from there.

 

good call, that slipped my mind