hey people, was looking for an engine model on a kasea atv 2001, so i can determine what engine size, 50cc or the 90cc, anybody have any luck with that, all i see is a frame vin and an id #on top rear engine above clutch..

 

Look on the side of the cylinder. Should say 49 cm3. Generic type engine that was used in the first Polaris youth models and Etons also.

 

thank you opt, i will take a look at it tomorow.

 

If it says 49cm3 than it is the 49-50cc correct?

 

Yes,it's considered a 50 cc machine.

 

thank you

 

i have another question for you, do you know how to wire in the cdi to the stator? the plug on the 2 wire stator was cut but there is still a 3 wire plug, do i just connect the wires from the 2 plug stator end to the one on the cdi? i just want to kick start it

 

See if this helps even though it's Chinese not Korean/Taiwanese wiring diagrams. Hooper Imports Experts on Chinese Motorcycles and Parts, Engines

 

OPT i found a way to wire in the cdi from a site called G-force, they have been very helpful up until now
http://www.ebay.com/itm/281145674407...84.m1497.l2649
this is the cdi i picked up i wired it the way the post told me to and when i kick over the kasea the light on the side lights up with every kick, i have yet to get it started being that it was sitting for quite some time, any suggestions to help from having one leg bigger than the other, i still have the starter connected maybe i can jump start it that way?