1) Engine problems.. If your quad wont run..post in here.

E ton 70 viper problems

Thread Tools
 
Search this Thread
 
  #1  
Old 02-26-2016 | 05:42 PM
admcconn's Avatar
Thread Starter
|
Weekend Warrior
Joined: Feb 2016
Posts: 4
Likes: 0
Default E ton 70 viper problems

Just put new carb and air filter on quad. It will idle fine, but when i hit the throttle it dies out. It will run on full choke, but will die out when letting idle. Checked carb before putting on, jets and float all looked good. Any help would be appreciated. Also, have good fuel flow.
 
  #2  
Old 02-27-2016 | 08:25 AM
LT80's Avatar
Extreme Pro Rider
LT80 Expert
Joined: Mar 2001
Posts: 8,342
Likes: 32
Default

Welcome to the forums.
I'd check the compression. should be 90+
 
  #3  
Old 02-27-2016 | 09:37 AM
MPDano's Avatar
Pro Rider
Joined: Jul 2012
Posts: 607
Likes: 2
Default

runs on choke is clogged or too small idle (slow) jet. Pull the idle jet from your old carb and make sure it is clean and put in your new carb. Verify jet numbers on them an post.
 
  #4  
Old 02-27-2016 | 10:19 AM
admcconn's Avatar
Thread Starter
|
Weekend Warrior
Joined: Feb 2016
Posts: 4
Likes: 0
Default

is there a number stamped on the jets?
 
  #5  
Old 02-27-2016 | 10:40 AM
LT80's Avatar
Extreme Pro Rider
LT80 Expert
Joined: Mar 2001
Posts: 8,342
Likes: 32
Default

Originally Posted by MPDano
runs on choke is clogged or too small idle (slow) jet. Pull the idle jet from your old carb and make sure it is clean and put in your new carb. Verify jet numbers on them an post.
I considered the new carb cleaned and correctly jetted...yes the jets are numbered. Pilot jets on the side, main jet on the bottom.

Guess we'll see.

FYI: you have yourself a finely made Tiawanese machine.
It's amazing how a lil ocean can separate good machines from less than good..
 

Last edited by LT80; 02-27-2016 at 12:29 PM. Reason: didn't want to offend the chinese community. :)
  #6  
Old 02-27-2016 | 11:49 AM
MPDano's Avatar
Pro Rider
Joined: Jul 2012
Posts: 607
Likes: 2
Default

Originally Posted by admcconn
is there a number stamped on the jets?
Yup. It may be very faint but it's there.
 
  #7  
Old 02-27-2016 | 12:28 PM
LT80's Avatar
Extreme Pro Rider
LT80 Expert
Joined: Mar 2001
Posts: 8,342
Likes: 32
Default

Originally Posted by MPDano
Yup. It may be very faint but it's there.
Yea! sometimes magnifier on top of magnifier. LOL
 
  #8  
Old 02-27-2016 | 12:31 PM
MPDano's Avatar
Pro Rider
Joined: Jul 2012
Posts: 607
Likes: 2
Default

Originally Posted by LT80
Yea! sometimes magnifier on top of magnifier. LOL
Yup, and with my old eyes. I usually take a pic of it with my phone and zoom in.
 
  #9  
Old 02-27-2016 | 01:28 PM
admcconn's Avatar
Thread Starter
|
Weekend Warrior
Joined: Feb 2016
Posts: 4
Likes: 0
Default

Originally Posted by MPDano
Yup. It may be very faint but it's there.
I'll get my magnifing glass out and get back with ya. Thanks for the help.
 
  #10  
Old 02-28-2016 | 09:44 PM
admcconn's Avatar
Thread Starter
|
Weekend Warrior
Joined: Feb 2016
Posts: 4
Likes: 0
Default

Originally Posted by LT80
I considered the new carb cleaned and correctly jetted...yes the jets are numbered. Pilot jets on the side, main jet on the bottom.

Guess we'll see.

FYI: you have yourself a finely made Tiawanese machine.
It's amazing how a lil ocean can separate good machines from less than good..
Put main jet from old carb into new carb and that did the trick. Quad runs great now. Thanks for the help.
 


Quick Reply: E ton 70 viper problems



All times are GMT -5. The time now is 07:16 AM.