I was tuning up my '05 Raptor 660 today and it would not restart after shutting it down. It would take a while for it to get any juice, even to turn on the lights. Then all of a sudden it would get power, but would not turn the motor over, just a clicking noise heard from the starter relay. The battery was not drained (producing well over 12v) I got my multimeter out and noticed that I wouldn't get 12v from the red output lead on the relay until a few minutes after sitting. When I got the 12v, I would hit the start button, hear a click and the voltage would just drop off (from the output lead on the relay, not the battery itself). After beating on it for a while it came back to life and started from then on. Anyone have this problem before. I just want to make sure I am going to be replacing the correct part. Thanks in advance.

 

try jumping it.... also, try tightenign the screws/bolts on the battery(that hold the cables)