2001 Polaris SP HO 500 Dies in Nuetral and Reverse
Sep 28, 2007 | 04:53 PM
#1
Thread Starter
|
Weekend Warrior
Joined: Sep 2007
Posts: 1
Likes: 0
2001 Polaris SP HO 500 Dies in Nuetral and Reverse
I have a Polaris Sportmans 500 HO 2001 model. I had to adjust the Shifting linkage and now the thing dies in Nuetral and reverse. Any ideas? I am new to this whole thing. Could it be the carbuerator?
THX!
THX!
Sep 28, 2007 | 06:31 PM
#2
Quad Patrol
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
Joined: Apr 2000
Posts: 6,688
Likes: 1
2001 Polaris SP HO 500 Dies in Nuetral and Reverse
Try backing off the adjustment a little.You may be confusing the sensor by pulling it too tight.Now if it was doing this before I would say the reverse limiter is bad and either needs replaced or bypassed.
Thread
Thread Starter
Forum
Replies
Last Post
ranvette
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
2
Jul 4, 2015 06:13 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)