Trying to figure out how to clean out the carb. Right where the gas comes in it's clogged. Can't blow in or suck out. I worried to use an air compresser and try it. Any ideas on how to clean it out?

 

Welcome to the forums.
Yes, remove the carb from the machine. Take the float bowl off (bottom of carb).
Remove the float, and both jets and clean all well.

 

That did it. Was able to pull it out and clean it up. Thanks

 

yea ccarb cleaner and compressed air is the best stuff to uses for that sort of stuff but to prevent just stick a fuel filter in the fuel line to prevent again as it could if you have any crap left in ur tank all the best