Removing rear drive shaft
#1
Removing rear drive shaft
Hello all ,
Can anyone give me an idea of how hard it will be to remove the rear drive shaft on an 01 400 manual 4x4? What exactly will I have to remove ? I took the 4 bolts that hold the shaft to the motor but it seem that I may have to remove it from the rear as well. Can anyone help me here....
Thanks in advance
Eugene
#2
#3
Removing rear drive shaft
Originally posted by: yearmax
Hello all ,
Can anyone give me an idea of how hard it will be to remove the rear drive shaft on an 01 400 manual 4x4? What exactly will I have to remove ? I took the 4 bolts that hold the shaft to the motor but it seem that I may have to remove it from the rear as well. Can anyone help me here....
Thanks in advance
Eugene
Hello all ,
Can anyone give me an idea of how hard it will be to remove the rear drive shaft on an 01 400 manual 4x4? What exactly will I have to remove ? I took the 4 bolts that hold the shaft to the motor but it seem that I may have to remove it from the rear as well. Can anyone help me here....
Thanks in advance
Eugene
#4
Removing rear drive shaft
Originally posted by: yearmax
Hello all ,
Can anyone give me an idea of how hard it will be to remove the rear drive shaft on an 01 400 manual 4x4? What exactly will I have to remove ? I took the 4 bolts that hold the shaft to the motor but it seem that I may have to remove it from the rear as well. Can anyone help me here....
Thanks in advance
Eugene
Hello all ,
Can anyone give me an idea of how hard it will be to remove the rear drive shaft on an 01 400 manual 4x4? What exactly will I have to remove ? I took the 4 bolts that hold the shaft to the motor but it seem that I may have to remove it from the rear as well. Can anyone help me here....
Thanks in advance
Eugene
#5
Removing rear drive shaft
Originally posted by: yearmax
Hello all ,
Can anyone give me an idea of how hard it will be to remove the rear drive shaft on an 01 400 manual 4x4? What exactly will I have to remove ? I took the 4 bolts that hold the shaft to the motor but it seem that I may have to remove it from the rear as well. Can anyone help me here....
Thanks in advance
Eugene
Hello all ,
Can anyone give me an idea of how hard it will be to remove the rear drive shaft on an 01 400 manual 4x4? What exactly will I have to remove ? I took the 4 bolts that hold the shaft to the motor but it seem that I may have to remove it from the rear as well. Can anyone help me here....
Thanks in advance
Eugene
#6
#7
Removing rear drive shaft
Well I worked on it some tonight and So far I had to remove the shock and link arms on one side to remove the shaft. Then I had to remove the 4 hex key bolts that hold the housing on so that I can get the seal out... Damn thing did not want to come out at all.. So far all is apat and cleaned .. Just wanting on the new seal to come in. Will keep you posted on my advanture.
Has anyone else had to replace this seal before ?
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)