Hello,

This is for a 2003 400 4X4 FIS

Referring to the picture below, I've already removed the input flage (#41) and everything to the left of it. Now, I'm trying to get to my real drive shaft seal (#31) but need to remove the 15/16" Nut (#34), so that I can remove the other flange and get to the seal.

Picture of Rear Shaft


I have tried to tug at the nut but it won't move. Am I doing something wrong here or do I just have to tug at the nut harder? Just don't want to break anything? Has anyone remove the nut before?

Dennis

 

OK, I finally got the nut out! I had to yank it real real hard!

I was able to remove the flange and pry out the seal.

Dennis