Arctic Cat Discussions about Arctic Cat ATVs.

2008 400 bogging and stalling problem

Thread Tools
 
Search this Thread
 
  #1  
Old 05-02-2010, 04:50 PM
cdiamond's Avatar
Weekend Warrior
Thread Starter
Join Date: May 2010
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default 2008 400 bogging and stalling problem

Just bought a new 2008 400 auto 4x4 put a few miles on it last november and some this winter, but recently took it to my camp and started putting a few more on it when I noticed that while riding it would bog down and want to stall i would have to feather the throttle to keep it running. it would act up for a few minutes and then it would be ok for a while only to act up again this went on all weekend and I am not sure what the issue would be and would like some information on what this might be. I do notice that at times some fuel will spray out of the breather tubes that are located under the speedo it also seems to do it more when it is hot.
Ant help would be apprciated
 
  #2  
Old 05-04-2010, 02:12 PM
sassee's Avatar
Range Rover
Join Date: Sep 2007
Posts: 130
Likes: 0
Received 0 Likes on 0 Posts
Default

With it running and it starts doing this, can you turn on your lights/accessories and it clear up? If so, with the engine running, check the voltage reading at the battery. if you are greater that 15.5 volts (I think that is the magic number) then you have a bad rectifier. mine did this and I checked everything on it/in it before i found the problem. Too much volts will cause it to hesitate and stumble.
 
  #3  
Old 05-04-2010, 03:35 PM
cupsz71's Avatar
Pro Rider
Join Date: Jul 2008
Location: Minot ND.
Posts: 258
Likes: 0
Received 0 Likes on 0 Posts
Default

So will a gummed up carb. Run a can of SEAFOAM thru it and see if that helps.

my .02¢
 
  #4  
Old 05-04-2010, 06:26 PM
cdiamond's Avatar
Weekend Warrior
Thread Starter
Join Date: May 2010
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

No because we did a night ride and it still acted up. I am thinking since I bought it last november 2009 new and it was a floor model it has something to do with it sitting so long. It is still under warranty how hard is it to pull the carb off and go through it or should I just take it to the dealer? Your guys thoughts?
 
  #5  
Old 05-04-2010, 08:14 PM
KQ400Pilot's Avatar
Pro Rider
Join Date: Nov 2008
Location: Bellingham WA
Posts: 300
Likes: 0
Received 0 Likes on 0 Posts
Default

As long as it is under warranty, take it to your dealer.
You paid for that warranty when you purchased the quad, and if you do any modifications yourself, you give the manufacturer a easy out from fixing the problem--they will claim you broke it.
 
  #6  
Old 05-04-2010, 09:10 PM
GoFastCat 00's Avatar
Trailblazer
Join Date: Mar 2010
Posts: 62
Likes: 0
Received 0 Likes on 0 Posts
Default

Something in the gas? Maybe?
 
  #7  
Old 05-05-2010, 06:18 AM
Moike's Avatar
Weekend Warrior
Join Date: May 2010
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Default

I have 2008 700 EFI and it would do it as well. Took to dealer 7 times and it turn out to be the coil. Once it was replaced I have not had any issue since. So if machine is under warranty I would certainly have the dealer look after it.
 
  #8  
Old 05-07-2010, 03:17 PM
cdiamond's Avatar
Weekend Warrior
Thread Starter
Join Date: May 2010
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks all for your help sea foam is where I will start then If I have to I will trailer it back and take to the dealer. Thanks again
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Sjrpp
General Chat
5
05-02-2023 03:59 PM
Sjrpp
General Chat
2
11-15-2019 09:59 PM
Sjrpp
Kawasaki
4
06-02-2019 07:25 AM
RedRancher
Yamaha
10
07-10-2015 06:36 PM
Sjrpp
Other ATV Topics
0
07-05-2015 09:04 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: 2008 400 bogging and stalling problem



All times are GMT -5. The time now is 12:01 AM.