2004 400 carb rebuild issues
#1
2004 400 carb rebuild issues
My quad is up and running very well now,
by pin pointing an issue with the needle and main after all I have tried, including many shims on the needle I decided to clean and reinstall the old needle and main to see if it would help and it started and ran great. The needle in the rebuild kit was brass and the original needle was stainless and thats the only difference.
For other info on this thread go to suzuki titled ( wont rev )
by pin pointing an issue with the needle and main after all I have tried, including many shims on the needle I decided to clean and reinstall the old needle and main to see if it would help and it started and ran great. The needle in the rebuild kit was brass and the original needle was stainless and thats the only difference.
For other info on this thread go to suzuki titled ( wont rev )
#2
Thread
Thread Starter
Forum
Replies
Last Post
bzdok1234
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
30
02-23-2016 01:55 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)