H1 belt slipping
#12
I'm going to replace the rollers in the primary and hope that works. When I opened up the cover after the belt came apart the primary was open and the rollers were rattling loose. They probably took a beating. A few of them have nicks and scratches but nothing drastic. I'm not sure how bad they can be scuffed up and still be OK.
#14
Could be a mismarked belt....there should be a deflection measurement for the belt when mounted on the clutches, this might give you a clue as to whether you have the right belt.
#19
#20
Feel free to question my abilities. Lol. That's why I'm asking. I'm not a mechanic. I know a little bit, and have Google and youtube. As for your last question, yes. I put the arrow pointing toward the rear of the machine. Towards the primary. I'm beginning to wonder if it's not a wet clutch issue just by processs of elimination. I know nothing about the wet clutch at all. When it's slips it makes a squealing sound like the belt if it were slipping. 2 questions... If the wet clutch were slipping would it make a squealing sound like that, and if the wet clutch were bad could it cause the belt to slip for some reason?