ATC 3-Wheelers Discussions on ATC 3-Wheelers.

Performance mods for a 200es engine?

Thread Tools
 
Search this Thread
 
Old May 23, 2000 | 01:28 AM
  #1  
guerryb's Avatar
Thread Starter
|
Trailblazer
Joined: May 2000
Posts: 43
Likes: 0
Default

I recently bought an engine off of a ATC200es that I'm putting on an off-road go-kart that is much like an Odyssey. I chose this engine because it has shaft drive, electric start, high and low ranges, reverse and a clutchless 5-speed. Eventually I will want to do a complete rebuild and will want to use performance parts where feasible.
Does anyone have any suggestions on what to do? I have already picked up a Super Trap exhaust and I'll be rebuilding the carb when the parts come in.
What type of performance should I expect from the 200es engine as far as hill climbing and top speed are concerned.

Thanks!
 
Reply
Old May 26, 2000 | 12:13 PM
  #2  
bigmanm's Avatar
Trailblazer
Joined: Mar 2000
Posts: 48
Likes: 0
Default

You made a good choice on the engine you picked. I have a 1984 200es atc and I rebuilt my engine. I reccamend boring it out and putting a wiseco piston in with 10.25:1 compression ratio. THis really picked up my engine. I could hit 56 with my atc and pass any 4x4 on the trail. With the 10.25:1 ratio you will have to burn premium pump gas to keep it from spark nocking.

P.S. When you get all the mods done run a good synthetic oil. And if you run this engine hard let it cool at times. The air cooled motor will get hotter faster with these performance mods.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Cole Hadden
Polaris
25
Jun 15, 2025 09:05 AM
Nondem
General RUV / UTV Discussion
16
Feb 22, 2020 12:20 PM
greg74
Yamaha
15
Sep 10, 2019 03:03 PM
ATVC Correspondent
Classifieds, Garage Sale & Swap Shop
0
Jul 15, 2015 02:07 AM
Dirtbikemike1
General Chat
1
Jul 11, 2015 03:36 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 10:28 PM.