the brakes on my 200s are sticking i don't know why or how its doing it. i think thats where the cables hook into the lever, but might be wrong. im getting tried of messing with it. its always the brakes too. andit cost a $h!t load of money to replace half the stuff on it.

 

Try unhooking brake cables at the levers + spraying wd40 inside the cable, use lots. Works for me.

 

Hey, you dont need brakes, they only slow you down...LOL

Like Eastwind said, got to oil the crap outta the cables to gettem to work.

 

Unhook the cables at the drums and see if it is the cable, or in the drum itself. Cable is easy, if it is in the drum, you have some work ahead of you. Make sure you have good seals on those drums, by looking at your pics you like to run in the water, and that will rust the hell out of the springs in the drum if the seals are bad.

 

Just be sure you dont spray the brakes themselves...or you wont have to worry about them sticking[img]i/expressions/face-icon-small-happy.gif[/img]

 

LMAO!

 

[img]i/expressions/face-icon-small-happy.gif[/img]