200s throttle assembly....??
#1
#2
#4
200s throttle assembly....??
Cool deal,
good to know that I did it right [img]i/expressions/face-icon-small-smile.gif[/img]
Thanks again,
Monk
p.s
Do you have a 200s,x,r or m SMFREY? I was just curious because I wanted to know if you've ever "tweaked" the carburetor (the pilot screw and the throttle screw) and was wondering if you have the specs on that. I have the manual, but it's specified settings are not quite it.
good to know that I did it right [img]i/expressions/face-icon-small-smile.gif[/img]
Thanks again,
Monk
p.s
Do you have a 200s,x,r or m SMFREY? I was just curious because I wanted to know if you've ever "tweaked" the carburetor (the pilot screw and the throttle screw) and was wondering if you have the specs on that. I have the manual, but it's specified settings are not quite it.
#5
200s throttle assembly....??
I currently have
2- 82 Honda 110s both built fairly healthy and regeared
1- 82 Honda 185S stock but header and Super Trap had to jet Has 200S carb
I can look at what I did on that at home tonight (Notes)
I do make notes on all Mods to my bikes
1- 83 Honda 200X I think it is stock
1- 86 Honda 200X it is healthy fast but no 2nd gear will fix when 83 200x gone
1- 03 Honda 400EX both regeared exhaust opened with larger spark arrestor and revchip
I have found the older bikes almost always need rejet
On the 110s we have to drill jets
Thanks
Ray
2- 82 Honda 110s both built fairly healthy and regeared
1- 82 Honda 185S stock but header and Super Trap had to jet Has 200S carb
I can look at what I did on that at home tonight (Notes)
I do make notes on all Mods to my bikes
1- 83 Honda 200X I think it is stock
1- 86 Honda 200X it is healthy fast but no 2nd gear will fix when 83 200x gone
1- 03 Honda 400EX both regeared exhaust opened with larger spark arrestor and revchip
I have found the older bikes almost always need rejet
On the 110s we have to drill jets
Thanks
Ray
#6
200s throttle assembly....??
yea I cleaned the carb up, sprayed the body openings out with carb cleaner, then blew them out with compressed air and changed out all the jets etc...
just wanted to get the specs on throttle screw and the pilot screw setting to get almost optimal mixture and idle [img]i/expressions/face-icon-small-smile.gif[/img].
Thanks,
Monk
just wanted to get the specs on throttle screw and the pilot screw setting to get almost optimal mixture and idle [img]i/expressions/face-icon-small-smile.gif[/img].
Thanks,
Monk
#7
200s throttle assembly....??
On my trike
82- 185S I am currently running a 83-200S carb
As I could not make the origional carb work and I have tried switching back several times it no work
But
200S carb PD35S
ended up jetting to 102
Pilot screw at 1.5 turns
needle jet at first groove
stock idle jet
I am ideling at about 1450 RPM
I run Sunoco Purple mixed with 92 octain 50/50 so timing is advanced from mark about 6*
I am also running a Header and SuperTrap exhaust and have added 3 vents to the airbox
Otherweise stock it screems
Thanks
Ray
82- 185S I am currently running a 83-200S carb
As I could not make the origional carb work and I have tried switching back several times it no work
But
200S carb PD35S
ended up jetting to 102
Pilot screw at 1.5 turns
needle jet at first groove
stock idle jet
I am ideling at about 1450 RPM
I run Sunoco Purple mixed with 92 octain 50/50 so timing is advanced from mark about 6*
I am also running a Header and SuperTrap exhaust and have added 3 vents to the airbox
Otherweise stock it screems
Thanks
Ray
Thread
Thread Starter
Forum
Replies
Last Post
fordfaithful21
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
9
12-07-2015 05:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)