ATC 3-Wheelers Discussions on ATC 3-Wheelers.

350x hard to start

Old Oct 21, 2008 | 05:57 AM
  #1  
jjcava's Avatar
Thread Starter
|
Weekend Warrior
Joined: Mar 2005
Posts: 6
Likes: 0
Default 350x hard to start

have 1986 honda 350x have to kick forever to get it started anyone have any suggestions jjc
 
Reply
Old Oct 22, 2008 | 11:17 PM
  #2  
Jbridered's Avatar
Trailblazer
Joined: Dec 2002
Posts: 57
Likes: 0
Default 350x hard to start

Engine cold or hot? Maybe valves. Put a hair dryer on your exhaust and heat the engine head up for a while. If it starts easy afterwards adjust your valves.
 
Reply
Old Oct 22, 2008 | 11:34 PM
  #3  
250arrrr's Avatar
Trailblazer
Joined: Aug 2008
Posts: 61
Likes: 0
Default 350x hard to start

Also, check the decomp lever. If its hung open you will kick forever....
 
Reply
Old Oct 24, 2008 | 11:21 AM
  #4  
scary132's Avatar
Range Rover
Joined: Nov 2007
Posts: 134
Likes: 0
Default 350x hard to start

Do you still have the stock jetting? They are pretty lean stock. I went up one size on the pilot jet (48 I think) and it starts so much easier. One click on the choke when cold. I went one up on the main jet too (160 I think) even with the stock pipe, you'll be surprised how much better it runs, especially in cold weather.

All assuming your compression and spark are good and valves are adjusted and decompression working properly.
 
Reply
Old Oct 24, 2008 | 10:12 PM
  #5  
jjcava's Avatar
Thread Starter
|
Weekend Warrior
Joined: Mar 2005
Posts: 6
Likes: 0
Default 350x hard to start

just bought bike once it's running it starts better after i kick when it's cold i pulled out the plug and it is dry no smell of gas choke is closed also
 
Reply
Old Oct 25, 2008 | 12:53 AM
  #6  
scary132's Avatar
Range Rover
Joined: Nov 2007
Posts: 134
Likes: 0
Default 350x hard to start

Is the motor stock as far as you know? Pipe? Air filter? You need to take the carb off and clean it/blow out the jets and passages. See how it is jetted. Check the mixture screw, stock setting is 1 3/4 turns out from seated. Once you know the carb is clean and set, filter is clean, put a new plug in.
To kick it.... Push the kick starter slowly all the way down first, bring it back up 3/4 of the way, then kick it hard as you give the throttle a little push.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MikeyBoyesq
ATV Racing
1
Nov 27, 2020 02:44 PM
TegraQuad
1) Engine problems..
13
Nov 26, 2017 01:40 PM
Ty Speece
Chinese Quads
15
Jul 2, 2015 04:59 PM
1000gade
ATV Videos
0
May 27, 2015 12:37 PM
dunc_n
Buying an ATV
10
Aug 26, 1999 09:32 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:06 PM.