I have a 1980 Honda 110 atc. There is a male port by the idle adj screw and in all the pictures I see there is a hose attatched to it. I cannot find out where the hose connects to on the other end!! Any info would be appreciated. Thanks!

 

hal9er i don't have an O.E.M. factory manual however i do have a INTERTEC Service and Repair Shop Manual , but it only cover's the 1984 Honda ATC 110 and it doesn't go into real detailed pic's showing where the line's are ; i can see that there are 2 hose's that come from the fuel/petcock and hook to the carb one is for the main on valve and ther other is for the reserve at least !

All the other hose's are just vacume lines if the male port is on the carb itself it maybe the drain tube that for fuel to leak out the over flow that leak's when the inlet needl valve leak's when the float stick's , if not it could a hose that goes to the air box but it's only a vent tube ; i could help more as well as other's the forums if you could take some pic's so we could geta look at the place where the fitting you're talking about !

And welcome to the forums !........

 

I will get a pic on here! Thanks!

 

3 Wheeler

 

the other end of the hose just hangs its only a vent.

 

thanks!