1/8th mile drag
#12
#13
1/8th mile drag
Originally posted by: kwiknik
Well are there any other 4-strokes theat have 1/8 mi ETs or are they just too embarassed to post....lol ![img]i/expressions/face-icon-small-wink.gif[/img]
Well are there any other 4-strokes theat have 1/8 mi ETs or are they just too embarassed to post....lol ![img]i/expressions/face-icon-small-wink.gif[/img]
It's ok 4-strokers dirt wheels says you fast and thats all that matters.
#14
1/8th mile drag
hello i have stock swingarm, coolhead 17cc domes, 220psi per cyl. 112race gas, 16-40 gearing, 35mm carbs, stock cly.+port/polish, cpi in frame's, MSD ignition,, with garbage mule utilty dunlope tires spinning most all 1st gear i ran 7.7-7.8's all day at 85,86mph can't wait until i get +4swingarm,wheelie bar, and good hoosiers or american racers tires,,, on and see what i get.........../ there are a few banshee's out there with aftermarket cylinders like la sleeve and t-rex and a 535trinity power valve running 6.5's even one that does 5.8 at 105mph yes superfast!!!!
#15
#16
1/8th mile drag
our times were without asphault tuning(same setup as on dirt except tires), i think if wwe went back it should do alot better. The person building our banshee ran a 6.52 on a stock stroke, stock frame banshee. It flies. He ran a 4.42 in 300ft and got out of the throttle 3/4 way down the track.
#17
1/8th mile drag
I was running stock shocks front and rear and the stock rear suspension linkage with a +6 arm. No special setups here. Could have used more gear, more swingarm, needs to be slammed, and I was running the hardest compound American Racer. I'm sure I'll never catch up to any of you fast guys.
Anyways, Badcompany you should try and make it up, only a 12 hour drive from Valdosta.
Anyways, Badcompany you should try and make it up, only a 12 hour drive from Valdosta.
#18