ATV Racing Discussions on ATV racing.

1/8th mile drag

Old Mar 16, 2004 | 08:46 PM
  #11  
kwiknik's Avatar
Thread Starter
|
Range Rover
Joined: Apr 2003
Posts: 108
Likes: 0
Default 1/8th mile drag

Hey CED I can't on the 27th but hopefully on the 28th .
 
Reply
Old Mar 17, 2004 | 12:59 PM
  #12  
SP700RACER's Avatar
Pro Rider
Joined: Oct 2002
Posts: 485
Likes: 0
Default 1/8th mile drag

8.14 @ 82 ON 87 octane pump gas and stock swing arm, and factory tires. 7.76 @ 85 on alky and slicks with wheelie bar. still running stock compression and stock cams. Special thanks to Doug Nicholas at Nicholas cycle for the lectron carb set up.
 
Reply
Old Mar 26, 2004 | 10:23 AM
  #13  
2004LEBANSHEE's Avatar
Pro Rider
Joined: Jan 2004
Posts: 780
Likes: 0
Default 1/8th mile drag

Originally posted by: kwiknik
Well are there any other 4-strokes theat have 1/8 mi ETs or are they just too embarassed to post....lol ![img]i/expressions/face-icon-small-wink.gif[/img]
They didn't buy bikes to be fast, they are worried about safer turning!!![img]i/expressions/face-icon-small-smile.gif[/img]

It's ok 4-strokers dirt wheels says you fast and thats all that matters.
 
Reply
Old Apr 11, 2004 | 05:07 PM
  #14  
SHY's Avatar
SHY
Weekend Warrior
Joined: Nov 2003
Posts: 12
Likes: 0
Default 1/8th mile drag

hello i have stock swingarm, coolhead 17cc domes, 220psi per cyl. 112race gas, 16-40 gearing, 35mm carbs, stock cly.+port/polish, cpi in frame's, MSD ignition,, with garbage mule utilty dunlope tires spinning most all 1st gear i ran 7.7-7.8's all day at 85,86mph can't wait until i get +4swingarm,wheelie bar, and good hoosiers or american racers tires,,, on and see what i get.........../ there are a few banshee's out there with aftermarket cylinders like la sleeve and t-rex and a 535trinity power valve running 6.5's even one that does 5.8 at 105mph yes superfast!!!!
 
Reply
Old Apr 12, 2004 | 01:06 AM
  #15  
Daren420's Avatar
Pro Rider
Joined: Feb 2001
Posts: 840
Likes: 0
Default 1/8th mile drag

First night out, my black / red Banshee went 7.412 @ 88.93 mph and 7.417 @ 88.35 mph. Needed to be geared a little higher and a few other modifications. It will surely break 90 mph and should make it into the 7.2s. We'll see as I get more time to dial it in.

Daren
 
Reply
Old Apr 13, 2004 | 09:48 PM
  #16  
badcompanyracing's Avatar
Pro Rider
Joined: Oct 2003
Posts: 224
Likes: 0
Default 1/8th mile drag

our times were without asphault tuning(same setup as on dirt except tires), i think if wwe went back it should do alot better. The person building our banshee ran a 6.52 on a stock stroke, stock frame banshee. It flies. He ran a 4.42 in 300ft and got out of the throttle 3/4 way down the track.
 
Reply
Old Apr 14, 2004 | 02:34 AM
  #17  
Daren420's Avatar
Pro Rider
Joined: Feb 2001
Posts: 840
Likes: 0
Default 1/8th mile drag

I was running stock shocks front and rear and the stock rear suspension linkage with a +6 arm. No special setups here. Could have used more gear, more swingarm, needs to be slammed, and I was running the hardest compound American Racer. I'm sure I'll never catch up to any of you fast guys.

Anyways, Badcompany you should try and make it up, only a 12 hour drive from Valdosta.
 
Reply
Old Apr 14, 2004 | 09:58 PM
  #18  
badcompanyracing's Avatar
Pro Rider
Joined: Oct 2003
Posts: 224
Likes: 0
Default 1/8th mile drag

we are making about a 9 hr. drive to monticello mississippi for the ATVDRA race. I want to see some fast people, fastest time i've ever seen around here in 300ft. was a 4.21 and it was a sttroker, i'd like to see some 3.0s.
 
Reply
Old Apr 15, 2004 | 07:23 PM
  #19  
Bubba297's Avatar
Extreme Pro Rider
Joined: May 2002
Posts: 3,042
Likes: 1
Default 1/8th mile drag

Better watch out for Kevin's Polaris this weekend. He might have something in a surprise.
 
Reply
Old Apr 15, 2004 | 07:26 PM
  #20  
badcompanyracing's Avatar
Pro Rider
Joined: Oct 2003
Posts: 224
Likes: 0
Default 1/8th mile drag

if my polaris was together i might need to watch out for him, but since its busted our other buddies need to worry.
 
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:18 AM.