I've got PRM stuff all over mine and haven't had any problems to date. The A-Arm guards and grab bar have taken a beating. I think they have great stuff.

 

I have bought all the PRM things for Bombadier and they are great. I have bend 5 Baja grab bars, broke 2 of them and they were my fault. I have learned to have additional AL welded on to them when new, before I install them on the quad. That way I don't have to worry when I hit it doing a wheelie. They will bend if you hit them hard enough. If you beef them up they will stand up to abuse. The skid plates are the best and the front PRM Baja bumper will take more abuse that the frame of the quad. I have mowed down trees with the PRM Baja Bumper.

 

my experience with prm as far as shipping has been nothing but very good and their products seem to be about as good as it gets.i wouldnt think that using your( 4th) post to be so critical of a company as quality conscious as prm is would be a good way to get started on these forums but to each his own.if you want to make comments like (screw you)as you did at least do it in a pm so the rest of us dont have to read your childish spew.there is a lot to be learned on this forum and perhaps you can add some good suggestions in the future of your own but this post is not a good way to get started.

 

Didnt meen to be so critical of PRM is I was just frustrated. [img]i/expressions/face-icon-small-smile.gif[/img]

I sent them an email....and they were very nice but they are not gonna give me a new one and thats ok. They took the time to talk to me explain things. Just for the fact that they came back to me so quick and nice I will be ordering another bar from them and possibly more.

Again dont think me an a-hole I was just frustrated.

Thanks for the post guys.

 

Understandable

 

sometimes what seems like a easy hit is harder than we think. i have prm grab bars and they have taken a lot of hits, from what you said i'm suprised it snapped but, sometimes that is the way things go. well good luck with the next one.