CAN-AM (BRP) Discussions about CAN-AM ATVs.

Info on Magura Hyd clutch........

Thread Tools
 
Search this Thread
 
Old Feb 25, 2004 | 03:27 PM
  #21  
ScoobyDFW's Avatar
Extreme Pro Rider
Joined: Jan 2000
Posts: 2,880
Likes: 0
Default Info on Magura Hyd clutch........

magurausa@magurausa.com

Magura USA
1902 Miller Drive
Olney, IL 62450
800.448.3876 - p
 
Reply
Old Feb 24, 2025 | 08:22 AM
  #22  
sevenduce's Avatar
Weekend Warrior
Joined: Feb 2025
Posts: 1
Likes: 0
Smile

Originally Posted by AlkyBurninX
A local dealer and friend of mine bought a bunch of returned parts from a wholesaler. Among these were quite a few Magura clutch kits for different bikes. Well I bought 2 of them CHEAP ($25 a piece) one was for a KX125 the other for a CR250. I rigged one up on my banshee and the difference was spectacular. I run YZ490 clutch springs which are stiff. I ended up taking it off because my aftermarket carbs hung down too low and the left side would fit in the boot right.

My main reason for replying is to tell you that the reason these were returned was the original purchaser pumped the lever before installing it and I had to rebleed the system. That was a PITA!
which one did you use the kx or the cr becuse I have a magura clutch for a Banshee that I'm going to try to put on a CR250 mine also needs to be bled in that bolt is expensive
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
buddieboy
Chinese Quads
4
Dec 9, 2016 05:50 PM
exmotocrosser
Polaris
2
Sep 26, 2015 08:18 AM
woodthings
Chinese Quads
4
Sep 25, 2015 05:58 PM
Todd C Wadas
2) Chassis problems..
0
Sep 23, 2015 11:31 PM
greg86hd
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
Sep 16, 2015 12:32 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 05:58 PM.