I am trying to put new clutch springs and I cannot remove the cover..All bolts are removed...The foot peg is also removed..i didnt forget the starter bolts or the shifter lever.....the cover is still tight to the motor...Do I have to remove the water pump?? If I pry any harder i feel I am going to break the cover...

 

did you get any movement at all? or is it stuck solid?

 

No movement at all..It is solid.

 

Well I am going to go try on it some more I hope it will come off [img]i/expressions/face-icon-small-disgusted.gif[/img]

 

did you disconect the cable? i'm pretty sure you need to turn that actuator lever to get it off

 

LiLnoTTs..You are Correct..I took the cable off and turned the lever and it slide right off.

 

glad it was that easy

 

glad i could help, i knew mine was like that too, and i thought we had to do that to get it off but i wasn't 100% sure

 

Becareful putting it back on, there is a plastic peice where the clutch arm shaft go in. It's plastic, I've heard of guys ruining it. Make sure you take your time and put it in properly.