Finding after market rims for my 800 is turning out to be a challenge. None of the dealers around here can even tell me what my stock offsets are. I just want to put a nice set of Douglas Rattlesnakes or something like them on it. I don't want them to stick out like roller skate wheels. Any Ideas or places to check?

 

Easyquader, flip through my pic's, I think I have a couple of different types in there pictured on my Outy you can look at.

pic 13 is just the original c-series ITP rims with factory tires
pic 22 is the bighorns on the MAXIS rims

As far as what to order, just order 4 of the front rims for the Prairie. The bolt patterns that will work are 4/137 or 4/136. The patterns 137 or 136 both work on the Prairies and the Outlander. Do not use the rear wheels for the prairies, that is where you will end up with the tires hanging way outside the fenders. Only use the wheels recomended for the frount of a prairie. I will try and find you some links to better illistrate exactly what I am talking about.

 

Here is a Link to the wheel you asked about

The part number you need is a 999-31, it has a 4+3 back offset and has the 4/136 bolt pattern. Your outy will need the same wheel on all four corners. I planning on getting a set these also at some point. i think it is the best looking wheel out IMO. Slap on a set of Bighorn Radials and these rims and that ought to look awsome.

 

Thanks for the info, guys. Turns out that Douglas is about 1.5 hr away and ITP is less than 30 min. I wanted to have them for Hurricane but will have to wait till next time for the Rattlesnakes. Thanks,

 

thought id reccomend motorsports alloys i thought they looked the best out of all wheels o and by the way guys their making a 10 inch wheel now but not for the pattern of the ds until they figure out if they'll sell but neways heres the address http://www.motosportalloy.com/