Just got my 15t front sprocket and Hmf pipe installed and on the frist test ride my rearend F**ks up , Looks like the clamp came loose and busted the bearings , what should i look 4 to be messed up when replaceing the bearings ?

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

 

If it was me I would just check everything, axle, inside the swing arm.

 

Iv been looking around to get a set of rear axel bearing and every were i look i find bearings for 01-05 but cant find any for a 2000, will the 01 bearings work??

 

That is a good question i really don't know. I would go into the Can-am forum and ask that question. I would think that they would but i could be wrong.

 

yep, they have the exact part # for 00' and 01' so you'll be okay. Look Here for good prices [img]i/expressions/face-icon-small-happy.gif[/img]

 

<div class="FTQUOTE"><begin quote>Originally posted by: SilverBomb

yep, they have the exact part # for 00' and 01' so you'll be okay. Look Here">http://www.cheapcycleparts.com...ands/4/default.aspx[/S</a> for good prices [img][/img]</end quote></div>



Thanks SIlverBomb..

 

If the old bearing is not to denigrated a bearing supply shop can mach the bearing they only need to know the in&out dia,width and race angle, if it has one, to replace it. Thats what I did with the swingarm bearing on my 250 Moto4 and saved less than Half price because the bearing did not come out of a box with Yamaha printed on it.