Wileyco duals on DS650
#3
Wileyco duals on DS650
#4
#6
Wileyco duals on DS650
Was wondering if anyone here was gonna pick up one the sets of these on ebay. The Polaris dealer carries them for most of the Polaris quads, and I got to ride a Pred with the Wileyco duals and was not really impressed with them. Sound good, but didn't seem to add much power anywhere. The head pipes are small in diameter and have some weird angles in them.
Chris
Chris
#7
Wileyco duals on DS650
i have LTE duals and i like it wonderfull sound and give very nice power
http://img241.imageshack.us/my...age=16092008036et0.jpg
http://img241.imageshack.us/my...age=16092008036et0.jpg
Trending Topics
#8
#9
Wileyco duals on DS650
Make sure the kit comes with 8 clamps.
4 large, 2 medium and 2 small.
The 2 medium go on the beginning of the last pipe that connects to the silencer, it must be on the pipe before joining.
There is not enough room to install after the pipes are together.
The 2 small clamps go on the pipe before the last pipe. Same criteria as above.
The large clamps can be installed last.
2 connect the last pipes to silencers and the other 2 connect the headpipes to first med pipe.
Silecone the rubber straps to hangers and let dry before install. They come off otherwise during tightening of clamps.
I added an extra 1/2 inch spacer to outward silencer. I wanted at least 3/4 inch space betwwen silencers.
Be patient, it takes awhile.
4 large, 2 medium and 2 small.
The 2 medium go on the beginning of the last pipe that connects to the silencer, it must be on the pipe before joining.
There is not enough room to install after the pipes are together.
The 2 small clamps go on the pipe before the last pipe. Same criteria as above.
The large clamps can be installed last.
2 connect the last pipes to silencers and the other 2 connect the headpipes to first med pipe.
Silecone the rubber straps to hangers and let dry before install. They come off otherwise during tightening of clamps.
I added an extra 1/2 inch spacer to outward silencer. I wanted at least 3/4 inch space betwwen silencers.
Be patient, it takes awhile.