modified stock a-arms
#1
i have seen and read a lot about the overly quick steering and dartiness of the ds.timmyboy seems to have found the fix with there a-arms.since i am short on cash i modified my stock arms.i increased the positive caster 2 deg which is the same as timmyboy.i have not tried it out yet but will let anyone know if they are interested.
#3
remove top a-arms and bushings.you need to machine .065" off the back edge of the pivots.i figured this to be 2-2.5 degrees additional positive caster.you will need to get .065" shims,i used some fender washers,just have to go through a lot of them to find 4 the same thickness.drill out the holes in the shims or washers just big enough for the inner bushing to fit through the shim.need to remove .065" from the 1 plastic bushing per pivot.assemble and grease.mine are a perfect fit and seem just as sturdy as stock.it will cost almost nothing if you have or have a friend with a mill.
#4
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)