help hesitation #$%^&*&^%$#@#$
#1
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
My ds has been hesitating (bogging almost stalling) when i take a hard right turn or if I go down a steep inlcine.
I sprayed carg cleaner all over ... inside the bowl in the intake etc. ,but I did not disassemble it.
I have also check the wires and everything else is fine.
One other question off this topic .... best clutch and springs. I heard to use heavy duty springs and the stock clutch.
your thoughts?
[img]i/expressions/face-icon-small-disgusted.gif[/img]
#3
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
I'll take a stab in dark and say that since it happens on inclines and hard turns, the float level may be out of wack, making too low a level in the bowl. If the fuel level in the bowl is too low, the jetting circuits may not be reaching the fuel when the bike is tilting. Sorry, don't remember float level spec - at work and no shop manual. Also check and be sure the fuel tank vent is not pinched.
#4
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Thanks for your advice ... I'll check the float the the vent tube.
Now that I think about it ... I just replaced my sparks plugs,so I could of pinched the tube when putting the tank back on.
thanks again
any other tips would be apreciated until I get the problem solved.
Now that I think about it ... I just replaced my sparks plugs,so I could of pinched the tube when putting the tank back on.
thanks again
any other tips would be apreciated until I get the problem solved.
Thread
Thread Starter
Forum
Replies
Last Post
house1
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
3
08-09-2015 10:49 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)