CAN-AM (BRP) Discussions about CAN-AM ATVs.

Went Riding Yesterday...

Thread Tools
 
Search this Thread
 
Old Mar 24, 2003 | 04:19 PM
  #1  
zZArAZz's Avatar
Thread Starter
|
Range Rover
Joined: Jan 2003
Posts: 171
Likes: 0
Default Went Riding Yesterday...

Just getting used to my Baja... It is starting to warm up here in Ohio and I am loving the 70 degree weather!!
I finally got some dry ground to play on *Traction* and I am really loving the pipe on my ride..
I was hammer down in 4th gear, coming around a turn near some corn fields and hit a big *** mud puddle and whoosh.. completely soaked... And go figure, I had my goggles off, cause they were fogging up[img]i/expressions/face-icon-small-smile.gif[/img]
My buddy was laughing at me trying to wipe my eyes while nasty muddy water was dripping off my helmet....
The one thing about riding wheelies on a Baja, the gearing is so tight, you do not have very long between shifts...
At the end of the day I was getting used to the balance point and really started nailing them... I dropped the clutch in second, got the front end up really high, higher then usual...
Right when it started heading back down, I powershifted into 3rd and picked the front back up and held it till I ran out of gear...
Tried to hit 4th but it just wasnt happening[img]i/expressions/face-icon-small-smile.gif[/img]


What a blast!!!

The Beast..
 
Reply
Old Mar 24, 2003 | 04:48 PM
  #2  
BigPink's Avatar
Trailblazer
Joined: Feb 2003
Posts: 87
Likes: 0
Default Went Riding Yesterday...

Hey man, what kind of pipe do you have? I have a trinity on order but its never too late to kill it. I ordered it 26 yrs. ago and its still not here!!!!
 
Reply
Old Mar 24, 2003 | 04:58 PM
  #3  
zZArAZz's Avatar
Thread Starter
|
Range Rover
Joined: Jan 2003
Posts: 171
Likes: 0
Default Went Riding Yesterday...

Heh, I ordered mine direct from Yoshimura.. Just the slip on though.. It is way louder and with jetting it has a bunch more mid to top end...
Also removed the air box lid...
I was thinking about new gearing for trail and track riding...
I would buy another Yosh pipe and It was delivered in about a week.
Total was $350.00 plus shipping..
Link above is now fixed,.,
 
Reply
Old Mar 24, 2003 | 05:04 PM
  #4  
zZArAZz's Avatar
Thread Starter
|
Range Rover
Joined: Jan 2003
Posts: 171
Likes: 0
Default Went Riding Yesterday...

Yoshimura Online Store

Use the drop down menu's and look up a 2002 ds650
 
Reply
Old Mar 24, 2003 | 05:15 PM
  #5  
BigPink's Avatar
Trailblazer
Joined: Feb 2003
Posts: 87
Likes: 0
Default Went Riding Yesterday...

That pipe is pretty tight but I want the full unit. I put a K&N filter and Ron Wood CDI on already. I have the dynojet jet kit but I am waiting to install my pipe before I mess with the jetting. I also removed my airbox. My buddy just bought an 03 limited edition Raptor. It is pretty quick but not as quick as mine. The CDI really helped her out. One thing I noticed about the DS and the Raptor is throttle response. I have a lot more. I mean a lot! I haven't even put my new needle in yet.
 
Reply
Old Mar 24, 2003 | 05:28 PM
  #6  
zZArAZz's Avatar
Thread Starter
|
Range Rover
Joined: Jan 2003
Posts: 171
Likes: 0
Default Went Riding Yesterday...

Cool, I am just partial to Yosh products, I have always used them. There is a chrome pipe out for around 200 that matches up nice...
 
Reply
Old Mar 25, 2003 | 08:03 AM
  #7  
BillDS650's Avatar
Pro Rider
Joined: Jan 2002
Posts: 1,461
Likes: 0
Default Went Riding Yesterday...

I have had the Yosh and I have the new MBRP Race slip-on. I Like the MBRP over the Yosh, no repacking, quitter and the performance is just as good if not better.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Nondem
General RUV / UTV Discussion
16
Feb 22, 2020 12:20 PM
HondaR24
ATV Videos
6
Jul 16, 2015 10:45 AM
honda71
Honda
4
Jul 12, 2015 05:56 AM
Edgeslade
Where to Ride
0
Jul 10, 2015 05:08 PM
honda71
Other ATV Topics
0
Jul 8, 2015 02:13 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 11:55 AM.