Anyone up for Hungry Valley or Red Rocks this Weekend?
#14
Anyone up for Hungry Valley or Red Rocks this Weekend?
One of my valve guides on the intake side is leaking. The rings are fine. Or apear to be. The cyclinder has what apears to be a scratch. But you can't get it to catch on your finger nail. So Im gonna try honeing and re-ringing it. Still not sure if I want to spend the duckets for the larger valves yet though.
#15
Anyone up for Hungry Valley or Red Rocks this Weekend?
You know larry let me know what you want to do with those valves, because I can get them a hell of a lot cheaper than Ron Woods or TVI will sell them for. These guy's have put about a 100% markup on those valves![img]i/expressions/face-icon-small-mad.gif[/img] If I were you I would get the head work done now while you have it off. I can get it done for you for about $1000.00. And you can have it back in less than 2 weeks! Just depends on how you ship it. I wish I could get my scanner to work and I would show you my results from my flow bench testing!! IT's SICK!!!!![img]i/expressions/face-icon-small-happy.gif[/img] I can run up to a .600 lift and still get 75% it's awesome!! Don't let the 75% thing fool you it is a percentage based on CFM readings anything above 70% is considered awesome. I am flowing around 320 cfm right now with the cams I have right now!! Let me know so I can get you dialed in, I am going to leave here in perhaps a week and a half, This whole Planet X thing has me totally freaked out right now! So I am heading for the High country!!
#17
Thread
Thread Starter
Forum
Replies
Last Post
Jeff Roper
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
02-01-2022 11:48 AM
Scooter's Shop
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
23
10-22-2015 07:04 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)