Which wheel spacers
#3
Which wheel spacers
Hey Shawn, We just got ours and my son who just turned Three loves his. First day on it and he is a natural. I do have a few issures however that must have occurred during shipping. The axle is bent. I called the next day and the lady was very nice and said she would ship one out that day. Also the rear fender is scracthed and gouged pretty bad from the metal shipping crate. I was told to take pictures and send them in, which i will do. No big deal.
All in all, i must say that this atv rocks. My son should injoy it for years to come.
All in all, i must say that this atv rocks. My son should injoy it for years to come.
#4
Which wheel spacers
I also bought the 90 from raceway and also put the wheel spacers from there site on it shortly after and if you think the quad rocks without them wait till you put a set of these solid aluminum machined spacers on it! I have some photos you can look at sitting next to a couple of larger quads, you can tell me what you think! www.putfile.com/socaltoyman
#5
#7
Which wheel spacers
John,
On your website on the spacers for the mini falcon, you have a note that says "Floor foot panels may have to be cut out 1" on left/right front sides for full turning radius."
I was using a 2.5" spacer in front and when turning the tires caught on the baskets. Please explain in detail how to eliminate this problem. I have spacers on rear wheels already. I want the front widened also.
On your website on the spacers for the mini falcon, you have a note that says "Floor foot panels may have to be cut out 1" on left/right front sides for full turning radius."
I was using a 2.5" spacer in front and when turning the tires caught on the baskets. Please explain in detail how to eliminate this problem. I have spacers on rear wheels already. I want the front widened also.
Thread
Thread Starter
Forum
Replies
Last Post
badgerboy1
Trailers, Toy Haulers, Motorhomes.
5
09-26-2017 06:11 PM
ATVC Correspondent
Performance Mods and Project Quads
5
10-10-2015 10:20 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)