Well it finally broke.
#11
Well it finally broke.
Whow, close to 4" for the center hole - I'm surprised that there was enough "meat" left to drill the lug holes at 110mm apart (@ 180 degrees straight across center to center). 4" is about 102mm. Are the lug holes even on 110mm?? (about 4-5/16" center to center??) I don't think that they can be.
Maybe what they sent you was for a "250 Hunter" ??? It will be interesting to get to the bottom of it.
Maybe what they sent you was for a "250 Hunter" ??? It will be interesting to get to the bottom of it.
#13
Well it finally broke.
00XJ - That replacement wheel CAN'T be for a JM250 Sport, MUST be for something else !!!
How WIDE is the Rim ??? If it is 10" wide -then it is for UT (Hunter)
250 Hunter Wheel Link
This is the JM250 Sport Hub
JM250 Sport Hub Link
This is the JM250 Sport Wheel
JM250 Sport Steel OEM Wheel
This is a Jetmoto Aluminum Upgrade Rear Wheel
JM250 Sport Upgrade Aluminum Rear Wheel
Hope that these help you. I had once where Danielle said "Oh, I thought that you had the Utility" - but, it got caught BEFORE anything was shipped. I think that at certain times of the year things get a little hectic at both John's and Eugene's.
How WIDE is the Rim ??? If it is 10" wide -then it is for UT (Hunter)
250 Hunter Wheel Link
This is the JM250 Sport Hub
JM250 Sport Hub Link
This is the JM250 Sport Wheel
JM250 Sport Steel OEM Wheel
This is a Jetmoto Aluminum Upgrade Rear Wheel
JM250 Sport Upgrade Aluminum Rear Wheel
Hope that these help you. I had once where Danielle said "Oh, I thought that you had the Utility" - but, it got caught BEFORE anything was shipped. I think that at certain times of the year things get a little hectic at both John's and Eugene's.
#14
Well it finally broke.
Kim, Here's an idea for you;
Tuesday morning, why don't you call Jetmoto Parts @ 650-875-9999 x 202, and order Part Number "J2548980" "OEM Rear Rim 10 Inch" for $36.99; BUT, tell them that they MUST !!!! physically check the wheel rim against Part Number "J2548475" Wheel Hub 2007 JM250 Sport (ESPECIALLY that the rim hole fits TIGHT against center mounting ring/flange on the hub) - BEFORE they ship the rim out.
This will eliminate the "seven blind men describing an elephant" syndrome.
The "Little Brown Truck" might even show up by Friday.
Good Luck
Tuesday morning, why don't you call Jetmoto Parts @ 650-875-9999 x 202, and order Part Number "J2548980" "OEM Rear Rim 10 Inch" for $36.99; BUT, tell them that they MUST !!!! physically check the wheel rim against Part Number "J2548475" Wheel Hub 2007 JM250 Sport (ESPECIALLY that the rim hole fits TIGHT against center mounting ring/flange on the hub) - BEFORE they ship the rim out.
This will eliminate the "seven blind men describing an elephant" syndrome.
The "Little Brown Truck" might even show up by Friday.
Good Luck
#17
Well it finally broke.
<div class="FTQUOTE"><begin quote>Originally posted by: mywifesquad
I got a 3.53 step on the hub. a 5.55 hole in the rim. Bolt holes are 10mm(.394) on a 110 mm bolt circle.</end quote></div>
MWQ - Don't you mean 3.55 Hole in Rim ???? The 110mm (4-5/16") bolt holes would be kinda "in space" ?????
Now - Lets see, where did I put that "Measure Stick" !!!
I got a 3.53 step on the hub. a 5.55 hole in the rim. Bolt holes are 10mm(.394) on a 110 mm bolt circle.</end quote></div>
MWQ - Don't you mean 3.55 Hole in Rim ???? The 110mm (4-5/16") bolt holes would be kinda "in space" ?????
Now - Lets see, where did I put that "Measure Stick" !!!
#18
Well it finally broke.
<div class="FTQUOTE"><begin quote>Originally posted by: NJDale
MWQ - Don't you mean 3.55 Hole in Rim ???? The 110mm (4-5/16") bolt holes would be kinda "in space" ?????
Now - Lets see, where did I put that "Measure Stick" !!!</end quote></div>
Yah 3.55 [img]i/expressions/face-icon-small-blush.gif[/img]
nah...I, just need to type slower, I use a digital caliper most of the time.
MWQ - Don't you mean 3.55 Hole in Rim ???? The 110mm (4-5/16") bolt holes would be kinda "in space" ?????
Now - Lets see, where did I put that "Measure Stick" !!!</end quote></div>
Yah 3.55 [img]i/expressions/face-icon-small-blush.gif[/img]
nah...I, just need to type slower, I use a digital caliper most of the time.
#19
Well it finally broke.
<div class="FTQUOTE"><begin quote>Originally posted by: mywifesquad
<div class="FTQUOTE"><begin quote>Originally posted by: NJDale
MWQ - Don't you mean 3.55 Hole in Rim ???? The 110mm (4-5/16") bolt holes would be kinda "in space" ?????
Now - Lets see, where did I put that "Measure Stick" !!!</end quote></div>
Yah 3.55 [img][/img]
nah...I, just need to type slower, I use a digital caliper most of the time.</end quote></div>
Yeah, Yeah, Yeah - As we get older we ALL blame it on a slip of the FINGER rather than a slip of the MIND !!!!!
<div class="FTQUOTE"><begin quote>Originally posted by: NJDale
MWQ - Don't you mean 3.55 Hole in Rim ???? The 110mm (4-5/16") bolt holes would be kinda "in space" ?????
Now - Lets see, where did I put that "Measure Stick" !!!</end quote></div>
Yah 3.55 [img][/img]
nah...I, just need to type slower, I use a digital caliper most of the time.</end quote></div>
Yeah, Yeah, Yeah - As we get older we ALL blame it on a slip of the FINGER rather than a slip of the MIND !!!!!
#20